Monoprice Dual Source 4-Channel A/B Speaker Selector W/ Volume Control

Please note: This volume control does not include a wall mounting bracket. This is a slide‑type wall plate volume control for speaker systems with power ratings of up to 100 watts per channel and impedance ratings of 4 ~ 16 ohms. Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier.

Please note: This volume control does not include a wall mounting bracket. If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position.It can accept speaker wire in sizes from 14 ~ 16 gauge and provides a frequency response range of 35Hz ~ 20kHz (+0/‑2db) at the full power rating of 50 watts per channel.

If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position. Monoprice Speaker Volume Controller RMS 100W (Rotary Type) - White Note that for any speakers wired in series, the overall impedance level is the sum of each speaker. Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier.

Monoprice Speaker Volume Controller RMS 75W (Rotary Type) - White Note that for any speakers wired in series, the overall impedance level is the sum of each speaker. Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier.It can accept speaker wire in sizes from 14 to 16 gauge and provides a frequency response range of 35Hz ~ 20kHz (+0/‑2db) at the full power rating of 75 watts per channel. If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position.

This is a rotary‑type wall plate volume control for speaker systems with power ratings of up to 50 watts per channel and impedance ratings of 4 ~ 16 ohms. Monoprice Speaker Volume Controller RMS 50W (Rotary Type) - White Note that for any speakers wired in series, the overall impedance level is the sum of each speaker..

Note that for any speakers wired in series, the overall impedance level is the sum of each speaker.

Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs 8 ohms This is done by setting the jumpers on the volume control to compensate for the number of speakers you have in a parallel configuration and the impedance level of the speakers. A simple rotary design allows you to set your audio to the perfect listening level. You're out in your yard enjoying your pool or BBQ. Note that for any speakers wired in series, the overall impedance level is the sum of each speaker.

  It supports a frequency range of 20Hz to 20kHz.  Accepts wire gauges up to 14AWG and maintains load at 8 Ohms.  Unfortunately, true multi-zone distribution systems are normally built into only the higher end receivers or require an expensive audio distribution network.P65Warnings.

However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control. A simple rotary design allows you to set your audio to the perfect listening level.

 One of the most popular trends in Home Audio is whole house audio distribution. The Monoprice MSV-4 is a dual source 4 zone speaker selector with built in independent volume controls for each source.