Monoprice Dual-Source 2-Channel A/B Speaker Selector With Volume Control And Impedance Matching

Please note: This volume control does not include a wall mounting bracket. This is a slider‑type wall plate volume control for speaker systems with power ratings of up to 50 watts per channel and impedance ratings of 4 ~ 16 ohms. Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier.

Please note: This volume control does not include a wall mounting bracket. If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position.It can accept speaker wire in sizes from 14 ~ 16 gauge and provides a frequency response range of 35Hz ~ 20kHz (+0/‑2db) at the full power rating of 100 watts per channel.

If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position. Monoprice Speaker Volume Controller RMS 75W (Rotary Type) - White Note that for any speakers wired in series, the overall impedance level is the sum of each speaker. Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier.

Monoprice Speaker Volume Controller RMS 50W (Rotary Type) - White Note that for any speakers wired in series, the overall impedance level is the sum of each speaker. Impedance Correction Chart SpeakerImpedance AmplifierRating Jumper Setting /# of Speaker Pairs x1 x2 x4 x8 4‑ohm Speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier.It can accept speaker wire in sizes from 14 ~ 16 gauge and provides a frequency response range of 35Hz ~ 20kHz (+0/‑2dB) at the full power rating of 50 watts per channel. If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position.

If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes ‑ just leave the jumper in the default x1 position. A simple rotary design allows you to set your audio to the perfect listening level.However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control.

Monoprice Outdoor Speaker Volume Controller RMS 100W - Gray When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier. The rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.

P65Warnings.  The speaker selector allows you to distribute your source signals to several sets of speakers distributed throughout your home.  Additionally, a good speaker selector like our 4-channel A/B selector listed here, will allow you to have different source audio sent to different rooms so that someone in one room can be listening to something different in another room. A Key element of any home audio distribution system is a speaker selector.

Additionally, a good speaker selector, like our 2‑channel A/B selector listed here, will allow you to have different source audio sent to different rooms, so that someone in one room can be listening to something different from someone in another room.gov Most importantly, a speaker selector provides impedance matching, which ensures that the additional speakers do not overload or damage your amp. A key element of any home audio distribution system is a speaker selector.

P65Warnings. The Monoprice MSV-4 is a dual source 4 zone speaker selector with built in independent volume controls for each source.

It supports a frequency range of 20Hz ~ 20kHz.P65Warnings.