APC By Schneider Electric Switched Rack 32-Outlet PDU - Switched - IEC 60309 3P+PE 60A - 20 X IEC 60320 C13, 12 X IEC 60320 C19 - 230 V AC - 17.30 KW

Rating :- 8.8 /10

Votes :- 13

The APC AP9871 12 Feet Standard Power Cord with 1 x power IEC 320 EN 60320 C19 - female, 1 x power NEMA L6-20 - male connectors.

APC AP9871 12 Feet Standard Power Cord - 1 x power IEC 320 EN 60320 C19 - Female, 1 x power NEMA L6-20 - Male - Black.

APC Serial Extension Cable - DB-9 Male - DB-9 Female - 15ft - Gray

American Power Conversion's UPS serial interface cables that provide direct communication between UPSs and desktops, workstations, and servers. AP9815 Compatibility: American Power Conversion UPS with all APC UPS product lines - Back-UPS, Back-UPS Pro, Smart-UPS, Smart-UPS v/s, Matrix-UPS and Symmetra Power Array.

The configurable notification features keep you informed of problems as they occur.

Flash Upgradeable Firmware: Convenient remote installation of UPS firmware updates.Smart Battery Management: Manage and maintain entire battery system with detailed battery information, even battery cartridge parameters, providing early fault warning. Network Management System (NMS) compatible: Make device information available to your preferred NMS by forwarding SNMP traps (events) or polling across SNMP (v1/v2c/v3) using the PowerNet MIB.

APC Basic Rack AP9567 PDU - 120V AC - 14 x NEMA 5-15R - Black

APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. APC now offers Basic Rack PDUs that mount vertically, without tools in the rear channel of a NetShelter VX.

APC AP9551 Basic Rack PDU - 120V AC - 14 x NEMA 5-15R - Black

APC now offers Basic Rack PDUs that mount vertically, without tools in the rear channel of a NetShelter VX.Horizontal and vertical units are available as well as a variety of power inputs and outputs to fit most power environments.

The APC AP8988X906 Rack-mount PDU includes 36 x IEC320 C13 Female Interfaces and 12 x IEC320 C19 Female Interfaces for secure and uninterrupted power for all of your server-based needs.

APC AP8988X906 Rack-mount PDU - 36 x IEC320 C13 Female Interfaces - 12 x IEC320 C19 Female Interfaces - 3 x RJ-45, 1 x RJ-11.

UPS

Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. AP8966 APC by Schneider Electric Switched Rack 32-Outlet PDU - Switched - IEC 60309 3P+PE 60A - 20 x IEC 60320 C13, 12 x IEC 60320 C19 - 230 V AC - 17.APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring.

User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads.

Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. AP8888 Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency. APC by Schneider Electric Rack PDU 2G, Metered, ZeroU, 23.

Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers.

User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads.

APC by Schneider Electric Rack PDU 2G, Metered, ZeroU, 23.