APC AP8868 Metered Rack Power Distribution Unit - 50-60 Hz - 10 KW - 3-phase - Black

APC AP8988X906 Rack-mount PDU - 36 x IEC320 C13 Female Interfaces - 12 x IEC320 C19 Female Interfaces - 3 x RJ-45, 1 x RJ-11.

30 kW User-defined alarms warn of potential circuit overloads before critical IT failures occur. Current metering provides real-time remote monitoring of connected loads.

Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.0kW, 240V, (30) C13 & (12) C19 - Metered - IEC 60309 60A 3P+N+E - 30 x IEC 60320 C13, 12 x I. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection.3kW - 240V - (30) C13 & (12) C19 - 30 x IEC 60320 C13, 12 x IEC 60320 C19 - 17. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership.

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. AP8887 Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.3kW - 240V - (30) C13 & (12) C19 - 30 x IEC 60320 C13, 12 x IEC 60320 C19 - 17.