Monoprice LAN And Coaxial Installation Kit With Tester And Tone Generator

95Gbps maximum bandwidth Supports multichannel high‑definition audio, including 7.. It transmits the split signals to receivers at distances up to 164 feet (50) away over a single Cat6 Ethernet cable.

Just get this nifty 3x1 Mini HDMI Switch and save some money and some hassles!Note that this switch has standard HDMI Connectors.5 Gbps per channel (7.4 Switch, Mini, HDCP 1.

You don't need a new TV and you don't need an expensive or bulky box. The switch will automatically switch between inputs, depending on which one is on at the time. Do you not have enough HDMI® inputs on your TV to handle all your new HD devices? That's it! It has a 20" cable and gold‑plated HDMI connectors for smooth, corrosion‑free connections. The switch has two inputs and supports the full 1080p resolution with HDCP™ pass‑through.

For more information, go to www.

P65Warnings.gov   Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. The kit comes with ten RJ11 plugs and ten RJ45 plugs.ca.

Monoprice RJ-45/RJ-11 Modular Crimping Tool For more information, go to www.The crimper includes a stripping and cutting blade, with a plastic shield to protect against accidental cuts when crimping.gov   A locking pin keeps the crimper closed when not in use.

. For example, if the 3rd LED on the Master unit and the 5th LED on the Remote unit both illuminate then the wire is crossed between pin 3 on the Master side and pin 5 on the Remote side. The tester consists of a main Master unit and a detachable Remote unit, each of which have an RJ11 and an RJ45 jack. DO NOT CONNECT TO A CABLE THAT IS PLUGGED IN TO A LIVE CIRCUIT AS THIS MAY CAUSE DAMAGE TO THE TESTER OR OTHER EQUIPMENT ON THE CIRCUIT! To test a cable: 1.

You can also use the included cutting pliers to cut LAN and coax cables to the proper length.. Are you unsure of which network tools and testers you need to order out of the myriad of options available? Requires three 9 volt batteries, two for the MCT‑700 and another for the LanSOHO 200 (not included).Additionally, the testing cables with a multimeter can be made easier using the included Black Box RJ45 breakout adapter, which gives easy access to each wire within the cable.

3. If there a wire is broken or otherwise not connected, the LED on the Master unit will illuminate, but no LED will illuminate on the Remote unit. A faulty or miswired connection will produce a different result, as follows: A. Monoprice RJ11 and RJ45 Modular Plug Tester Insert one end in the appropriate jack on the Master unit and the other in the same type jack on the Remote unit.

225/.35 coax crimping die (2 pieces) 1x Rotary coax cable stripper 1x Cutting pliers 1x Punchdown impact tool 1x #66 cutter/punchdown die 1x #110 cutter/punchdown die 1x Instruction sheet for MCT‑700 tester 1x Instruction sheet for LanSOHO 200 tester 1x Instruction sheet for HT‑322 coax stripper 1x Foam‑lined plastic briefcase with cutouts for each tool item Requires three 9 volt batteries, two for the tester and another for the LanSOHO 200 (not included) This kit includes the complete PID 8132 MCT‑700 Tracer/Toner/Cable Tester as well as the PID 8133 LanSOHO Pro Cable Tester (no longer available separately)..