Monoprice Heavy Duty Extension Cord - IEC 60320 C20 To IEC 60320 C21, 12AWG, 20A/2500W, SJT, 250V, Black, 6ft

So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.P65Warnings. Support Files: Specification Sheet (Apr 10, 2023)Monoprice™ and all Monoprice logos are trademark of Monoprice Inc.

5 Gbps controller, the drive will be limited to a transfer rate of 1.

For more information, go to www. Monoprice 10in SATA 6Gbps Cable with Locking Latch - Red Monoprice™ and all Monoprice logos are trademark of Monoprice Inc..

Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. For more information, go to www. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.

0 car charger features two USB ports and a maximum current capacity of 4., Ltd.Charge up to two Apple iPads® at full speed in your vehicle using this 2-port USB Car Charger from Monoprice!This USB 2. Monoprice Select Plus USB Car Charger, 2-Port, 4.

Extend the reach of your AC powered device using this AC power extension cord to power equipment from a distant power outlet. Simply plug your device into the receptacle, then plug the other end of the cord into an AC power outlet. UL® and the UL logo are registered trademarks of UL LLC. NEMA® is a registered trademark of National Electrical Manufacturers Association.

The C22 male inlet is used primarily on Cisco® and Juniper® Networks equipment to a UPS system or PDU, or to replace or upgrade a standard power cord provided by the device's manufacturer..Features: Connect Cisco® or Juniper® Networks devices to a PDU or UPS in a data centerRecommended for powering servers, routers, and other high‑output network devicesThick 12 AWG conductors manage the high power levels required for larger equipmentExtend the length of an existing power cord for more flexibilityDesigned for high‑density data environments Plug TypeIEC 60320 C20Receptacle TypeIEC 60320 C21Jacket MaterialSJT# of Conductors3Wire Gauge12 AWGMaximum Current20 ampsCertificationsETL, cETL, RoHS, REACH The C21 connector has two beveled corners and is rated to a higher temperature rating.It is a reliable solution for large server applications that require a higher‑rated, heavier‑gauge power cord.

Monoprice Heavy Duty Extension Cord - IEC 60320 C20 to IEC 60320 C19, 12AWG, 20A/2500W, SJT, 250V, Black, 10ft Updated Jul 14, 2021    Simply mate the male C20 connector into an AC power receptacle or rackmounted PDU or UPS system, then connect the female C19 end to a network device that requires a heavy‑gauge power cord, such as a server, router, network switch, or blade server. This cable is designed to carry up to a 20 amp/2500 watt, 125 volt load.

It is a reliable solution for large server applications that require a higher‑rated, heavier‑gauge power cord. Monoprice Heavy Duty Extension Cord - IEC 60320 C20 to IEC 60320 C21, 12AWG, 20A/2500W, SJT, 250V, Black, 6ft This 12 AWG cable is designed to carry up to a 20 amp/2500 watt, 125 volt load.Features: Connect Cisco® or Juniper® Networks devices to a PDU or UPS in a data centerRecommended for powering servers, routers, and other high‑output network devicesThick 12 AWG conductors manage the high power levels required for larger equipmentExtend the length of an existing power cord for more flexibilityDesigned for high‑density data environments Plug TypeIEC 60320 C20Receptacle TypeIEC 60320 C21Jacket MaterialSJT# of Conductors3Wire Gauge12 AWGMaximum Current20 ampsCertificationsETL, cETL, RoHS, REACH The C21 connector has two beveled corners and is rated to a higher temperature rating..

This cable is designed to carry up to a 20 amp/2500 watt, 125 volt load..