Monoprice Commercial Audio 60W 3ch 100/70V Mixer Amp (No Logo)

5% shieldingGold plated connectors  Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.This balanced cable feature a 3-pin male XLR connector on one end and a 1/4" male TRS plug on the other.Features: 16AWG stranded pure bare copper conductorsAluminum braid provides 97.

The Stage Right™ brand of professional audio cables brings you high performance cables at rock bottom prices.

.5% shieldingGold plated connectors  This balanced cable feature a 3-pin male XLR connector on one end and a 1/4" male TRS plug on the other.

It is ideal for connecting mixers, microphones, amplifiers, and other professional audio devices.

Note that very few amplifiers are stable under 2‑ohm loads, so that is usually not an option.

The amplifier can drive a speaker array consisting of one or more speakers presenting a 4~16 ohm load or to one or more 70V or 100V speakers connected in parallel as part of a large public address system. Monoprice Commercial Audio 60W 5ch 100/70V Mixer Amp with Microphone Priority (NO LOGO) When an EMC input trigger is detected, all outputs except MIC 1 are muted, allowing for the clear broadcast of important messages. Simplify the task of running distributed audio for restaurants, hotels, or anywhere large areas need background music and/or paging address systems. In a constant voltage system, all speakers on a given channel are connected in parallel and the complicated impedance calculations are replaced by simple wattage calculations.

.It has independent volume controls for each channel, as well as bass and treble tone controls and an switchable amplifier limiter circuit.ca.

For more information, go to www.ca.

In stereo or dual mono mode it supports 4‑ohm and 8‑ohm loads, or an 8‑ohm load for bridged mono operation.

P65Warnings. For more information, go to www.