The Ubiquiti UniFi Camera G4 PTZ is a superior surveillance camera for shopping centers, parking lots, airports, train stations, and other transportation hubs. Pairing G4 PTZ's advanced optical and video technologies with UniFi Protect's ease of use creates a unique solution for the most demanding environments. G4 PTZ comes with IP66 weatherproof casing and flexible powering options..
Channel width flexibility allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference.Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 WiFi technology. It features an integrated high-gain dish for long range and high performance.
.The Ubiquiti 24V 24W PoE Adapter is highly reliable and provide surge protection, earth grounding, clamping protection, maximum surge discharge and protection against electrostatic discharge events when used with Ubiquiti TOUGHCable™. This adapter works with the airGateway™ to bridge airMAX® connections to Wi-Fi at customer locations.
At the same time, it also provides access to all the network UniFi deployments from anywhere through a secure, private SSO (Single Sign-On).Using Bluetooth, the Cloud Key easily sets up with UniFi mobile applications and then the entire network is at the fingertip. TheUbiquiti UniFi® Cloud Key Gen2 Plusis an integrated computer and software controller for all UniFi® devices with the ability and agility to connect up to 50 UniFi® devices.
It provides world’s best unlicensed-band spectral efficiency at 15.Moreover, it supports FDD (Frequency Division Duplexing) in the full-duplex mode for 0. Users can deploy airFiber®24HD almost anywhere they choose (subject to local country regulations)..
airFiber® antennas have dual linear polarity and can be configured to support 45° slant polarization for improved noise immunity and Signal-to-Noise Ratio (SNR), dependent on the regulatory region..
Ubiquiti PowerBeam®ac 5GHz airMAX®ac Bridge 500mm Dish Reflector This technology gives performance breakthrough with intelligent QoS, improved TDMA (Time Division Multiple Access) latency as well as network scalability, and high data rate support that boosts throughput up to 450+ Mbps. The bridge has an industrial-strength construction with GEOMET-coated, corrosion-resistant fastners, galvanized-steel dish and a protective radome to shield the radio from external environmental elements. This eliminates cable losses and further improves performance..
.Ubiquiti LTU LR Long-Range Client Radio The Ubiquiti LTU-LR incorporating innovative industrial design with advanced technology, is a Point-to-MultiPoint (PtMP) 5 GHz Radio with an integrated antenna designed for use as a PtMP CPE.
This is further covered in a PE outdoor-rated, weatherproof jacket giving it an extreme weatherproof design.The Ubiquiti TOUGHCable™ PRO Cat-5e Ethernet Cable is a 1000 ft, multi-layer shielded, industrial-grade, category-5e ethernet cable that is built to stand tall even in the harshest environmental conditions. The complete assembly is covered in a cable shield, with a secondary cable shield, and lastly by the weatherproof jacket.
11ac Wave2 Wi-Fi Access Point - Simultaneous Dual-Band 4x4 Multi-User MIMO Its multiple-antenna system is optimized for MU-MIMO Beamforming using which it significantly increasing multi-user throughput and also contributes to the overall user experience. UniFi® HD Access Points offer radio hardware acceleration with independent, dedicated hardware offload for both 2. Ubiquiti UniFi® In-Wall 802.The access point runs on the UniFi Controller which is an intuitive and powerful software engine ideal for high-density client deployments.
The EtherMagic EndPoints can be easily set up with the EtherMagic app that helps to create a network and connect your PoE devices to your LAN.3af/at. The PoE output can be disabled entirely.
It supports over 300 clients using 4 x 4 MU-MIMO and OFDMA technologies to help ensure strong and efficient connections to devices. It is powered by connecting it to a PoE-compliant switch or through a separately purchased adapter.
The Ubiquiti airFiber®3X 3GHz Carrier Backhaul Radio, an integral part of the airFiber® X modular radio system is a 3GHz frequency band, high-reliability backhaul solution for the airFiber® X antennas.. Of all its specialities, the ability to operate side-by-side with multiple radios and still transmit and receive data without interfering with each other is a greater advantage.
.Ubiquiti U®Fiber SFP to RJ45 Copper Module™ The Ubiquiti U®Fiber SFP Module is a fiber connectivity solution with a RJ45 connector for copper ethernet cables.
This antenna delivers a powerful 360° coverage and 2x2 dual-polarity MIMO performance both in Line-of-Sight (LOS) or Non-Line-of-Sight (NLOS) applications. The Ubiquiti airMAX® 2. The airMAX® Omni antennas are capable of seamless, plug-and-play integration with Rocket® Radios, hence forming a powerful basestation to be deployed in a Point-to-MultiPoint networks.
.Ubiquiti UniFi Switch Lite 8 PoE 8-Port Gigabit Switch Grow your network capacity to support computers, printers, storage, and power over Ethernet devices with the UniFi Lite 8-Port Gigabit PoE+ Compliant Managed Switch from Ubiquiti Networks.
This access point is IP54 rated for semi-outdoor environments and includes both wall and ceiling mounting kits so that it can blend seamlessly with most environments.It supports over 300 clients using 4 x 4 MU-MIMO and OFDMA technologies to help ensure strong and efficient connections to devices.
3af-compatible product.3af Adapter designed for outdoor use that transforms almost any Ubiquiti PoE (Power over Ethernet) device into a fully compliant 48V, 802.Ubiquiti Instant 802.
Ubiquiti Networks UniFi Pro PoE 24-Port Gigabit Managed PoE Network Switch Expand your business's network with the fully manageable second-generationUniFi Pro PoE 24-Port Gigabit Managed PoE Network Switch with SFP+fromUbiquiti.